PROPSMITH

How to write a 3D prop prompt: size, materials and moving parts

Published

In short

Write one sentence that names the object, gives its size in centimetres or metres, says what it’s made of and what colour it is, lists the three or four parts that make it recognisable, and adds one sign of wear. Name any part that should move and how it’s attached (“a domed lid hinged at the back”), so it’s built as a separate piece you can animate later.

The five-part pattern

The prompts behind the public prop library of Propsmith, an AI 3D prop generator for games, follow one pattern. The order matters less than covering all five:

  1. What it is, specific enough to picture: “a four-door mid-size sedan”, not “a car”.
  2. Size, one dimension in centimetres or metres: “about 75 cm tall”.
  3. Materials and colours: “pale pine planks”, “dark green metal”, “white porcelain”.
  4. Distinct parts: the three or four features that make it that object, including any that move.
  5. Wear or state: one detail, such as “slightly creased edges” or “tilted slightly”.

The library’s prompts have a median of 28 words, and more than half give an explicit size. Here are nine of them, with what each produced.

Nine real prompts from the library

Cardboard box

a brown corrugated cardboard box about 40 cm wide with four hinged top flaps folded closed, a strip of tan packing tape along the centre seam, and slightly creased edges

Result: 0.4 × 0.3 × 0.3 m, 1,912 triangles. All five parts in one line. “Hinged” and “folded closed” tell the builder the flaps are separate pieces in their closed position.

Wooden crate

a square wooden crate about 80 cm on each side made of pale pine planks, with darker diagonal cross braces on each face, nailed corner boards and a removable plank lid

Result: exactly 0.8 m on each side, 4,052 triangles. “Pale” against “darker” gives two wood colours, so the braces read from a distance.

Oil drum

a steel 200-litre oil drum about 90 cm tall, painted dark blue with two raised rolling rings around the middle, a flat lid with a small screw bung and dented, rust-spotted rims

Result: 0.91 m tall, 12,200 triangles. A real-world standard (200 litres) pins down the proportions as well as the size.

Street lamp

a dark green metal street lamp about 5 m tall with a decorative base, a slim tapered pole and a curved arm holding an enclosed lamp head with a glowing panel underneath

Result: 5.01 m tall, 13,448 triangles, about 18 studs in Roblox at 28 cm per stud. Without the number, a lamp post could come out any height.

Gravestone

a weathered grey stone gravestone about 1 m tall with a rounded top and an engraved cross, tilted slightly, with moss creeping up its base

Result: 0.96 m tall, 11,050 triangles. Two wear details (the tilt and the moss) are enough to age it.

Office desk

a modern office desk with a rectangular light oak top on slim black metal legs, and a three-drawer pedestal on one side with drawers that slide out

Result: 1.4 m wide, 2,952 triangles. Each drawer sits on its own pivot, ready to slide.

Treasure chest

a wooden treasure chest with iron bands and corner brackets, a heavy front padlock, gold coins and gems piled inside, and a domed lid hinged at the back

Result: 0.88 m wide, 11,852 triangles. The lid hangs from a pivot on the back edge, exactly where the prompt put the hinge.

Human skull

a human skull in bone white with deep round eye sockets, a triangular nasal opening, pronounced cheekbones and a separate lower jaw with rows of teeth

Result: 0.22 m tall, 14,420 triangles. “Separate lower jaw” is what makes a chattering animation possible.

Sedan car

a four-door mid-size sedan in silver-grey paint with tinted windows, chrome door handles, headlights and red tail lights, four black tyres on five-spoke wheels, and front doors that can swing open

Result: 4.88 m long, 28,244 triangles, with each door and wheel on its own pivot.

The nine models above. View them in 3D or download GLB, STL or a Roblox file, free with a Propsmith account.

Weak prompts and strong rewrites

WeakStrongWhat changed
medieval chesta wooden storage chest about 90 cm wide made of dark oak planks, with black iron corner brackets, two iron bands, a ring handle on each end and a flat lid hinged at the back, with scuffed edgesSize, two materials, the parts, a hinge, one wear detail
a cool sci-fi cratea sci-fi supply crate about 1 m long in matte grey metal with orange stripes along the edges, recessed side handles, a glowing blue status light on the front and a lid that slides back“Cool” replaced by colours and shapes the builder can make
realistic old lamp, lots of detail, 4K texturesa brass oil lamp about 30 cm tall with a round fuel base, a glass chimney, a small adjustment knob and a curved handle, with a dull, tarnished finishTexture and realism words removed; materials and parts named
a Ford Mustanga two-door muscle car about 4.6 m long in bright red paint with a long bonnet, a black bonnet scoop, chrome bumpers, wide black tyres and doors that can swing openBrand swapped for a generic description

Leave out brand names, logos and text: describe a generic version. And don’t ask for image textures or “photorealistic” detail. Materials are flat colours with roughness and metalness, so a material word like “brushed steel”, “glossy ceramic” or “rough stone” does the work a texture would.

How to describe parts that will move

Propsmith builds each part as a separate, named piece, and puts a part that should move inside its own group with its origin on the natural pivot: the hinge line of a lid, the axle of a wheel, the joint of a jaw. A later sentence like “the lid swings open and stays open” then has something to move. To get that, the prompt has to name the part and say how it’s attached:

MotionWords that workLibrary example
Swings on a hinge“hinged at the back”, “can swing open”, “hinges down”Mailbox: “a front door that hinges down, and a red flag on the side that can swing up”
Slides“slide out”, “slides back”, “sliding”Barn: “large double front doors with white X braces that slide open”
Turns on an axle“on a hub that turns”, “that swivels”, “can turn”Windmill: “four large lattice sails on a hub that turns”
Lifts off“separate”, “removable”Cooking pot: “a separate lid with a knob”

Describe the prop in its starting position: a one-shot animation begins from the model exactly as built. Ask for a closed chest if it will open, a shut door if it will swing. Then animate it with a sentence (3 credits), as a loop or a one-shot. Library models come with a suggested animation, such as the treasure chest’s “the lid swings open and stays open”; it isn’t built yet, but anyone can grab the model (1 credit) and animate it (3 credits).

Size: numbers beat adjectives

Models are built at real size in metres, and the library shows the builder takes sizes literally: the barrel prompt said “about 1 m tall” and the model is 1.0 m; the crate said 80 cm and is 0.8 m; the television said 1.2 m wide and is 1.2 m. “Large” and “small” mean nothing without something to compare to. One dimension is enough; the proportions of the object fill in the rest. A correct size also matters downstream: in Roblox, import with Scale Unit set to Meter and the prop arrives at the right number of studs (see studs to metres).

Keep a set consistent with a style brief

A project can have a style brief of up to 1,000 characters. It’s added to every new model and every edit in that project, so a set of props shares one look; existing models don’t change until you edit them. Split the work like this:

  • The brief holds what every prop shares: palette, proportions, level of detail, amount of wear, era. For example: “Low-poly, flat colours, slightly cartoonish proportions. Weathered wood and rusted iron, muted blues and greens.”
  • The prompt holds what makes this prop itself: the object, its size, its parts and how they move.

Don’t repeat the brief inside each prompt, and don’t put object details in the brief. Under the brief above, prompts stay short and about the object: “a tavern table about 1.5 m long with a thick plank top and four turned legs”, then “a wooden ale barrel about 60 cm tall lying on its side in a cradle, with a tap at the front”. The brief supplies the shared look; each prompt supplies the thing.

A template to copy

a [material] [object] about [size] [tall / wide / long], with [part], [part] and [part], [colour details], [a part that moves and how it’s attached], [one sign of wear]

For more prompts with their results, see text-to-3D prompt examples. To understand what the triangle counts above mean for your game, read low poly vs high poly. Browse every prompt’s result in the public prop library (the medieval props make a good tavern set), or try your own on the Free plan (20 credits a month, no card needed).

Questions people ask

How long should a 3D model prompt be?

One sentence of about 20 to 35 words. The prompts behind the public prop library have a median of 28 words; past that, extra detail is often too small to see on a game prop.

Should I put the size in a 3D prompt?

Yes. Propsmith builds models at real size in metres, so “about 80 cm on each side” gives you a crate that imports at the right scale in Roblox, Godot or Unity. Say which dimension you mean: tall, wide, long or across.

Can I animate a prop I’ve already made?

Yes, by describing the motion in a sentence (3 credits). It works best when the prompt named the moving part and how it’s attached, so the part was built separately around its hinge or axle.

How do I keep a set of props in the same style?

Put the shared look in a project style brief (palette, proportions, level of detail, amount of wear) and keep each prompt about the object itself. The brief is added to every new model and edit in that project.

Why doesn’t asking for “realistic” or “4K textures” help?

Propsmith builds stylized props from simple shapes with flat-colour materials; there are no image textures. Describe shapes, materials and colours instead of realism.

Sources

Checked 1 November 2026.