PROPSMITH

Roblox studs to metres: get the size right on import

Published

In short

One stud is 28 cm (0.28 m), so 1 metre is about 3.57 studs (exactly 25/7). Since 16 June 2026 the Importer uses the same ratio when Scale Unit is set to Meter, so a GLB made at real size comes in at real size: a 2.13 m door is 7.6 studs tall, a little taller than a 6 to 6.5-stud humanoid avatar.

The conversion: 1 stud = 28 cm

Roblox’s units page gives one stud as 28 cm. Everything else follows from that:

  • Studs to metres: multiply by 0.28.
  • Metres to studs: divide by 0.28, or multiply by 25/7 (about 3.57).
  • Feet and inches: one foot is about 1.09 studs, and one stud is about 11 inches.
StudsIn metresMetresIn studs
10.280.51.79
51.4013.57
102.8027.14
100281035.7
2,048 (largest part)573.44100357

Roblox’s physics engine doesn’t convert units internally, and its docs say you could treat a stud as a foot if you stay consistent. They still recommend the standard units, because the rest of the platform, VR controls included, assumes them.

How tall is a Roblox character?

Avatar height is what makes a prop look right or wrong, and it varies. Roblox’s avatar settings page says classic-style avatars are around 5 studs tall (1.4 m) and avatars with more human proportions around 6 to 6.5 studs (1.68 to 1.82 m). Its reference mannequins are roughly 4.75 studs for the Classic body scale, 5.25 to 6.25 for Slender and 5.75 to 6.5 for Normal.

So props at real-world size sit well next to avatars with human proportions, and look a little big next to classic ones. Many games also build larger than life on purpose. Roblox’s own environment-art course keeps every doorway and hallway at least 10 studs wide and every wall at least 10 studs tall, so two players can pass and the camera has room. A real 2.13 m door is 7.6 studs tall, so decide early whether your game is life-size or oversized.

Common props in studs

Real sizes from model pages in the public prop library, which show each model’s size in metres, converted at 0.28 m per stud and rounded. Width × height × depth.

PropMetresStuds
Coffee mug0.11 × 0.10 × 0.080.39 × 0.36 × 0.29
Traffic cone0.36 × 0.69 × 0.361.3 × 2.5 × 1.3
Wooden chair0.46 × 0.91 × 0.471.6 × 3.3 × 1.7
Office chair0.69 × 1.17 × 0.672.5 × 4.2 × 2.4
Wooden crate0.80 × 0.80 × 0.802.9 × 2.9 × 2.9
Wooden barrel0.68 × 1.00 × 0.682.4 × 3.6 × 2.4
Wooden table1.80 × 0.77 × 0.906.4 × 2.8 × 3.2
Refrigerator0.70 × 1.79 × 0.802.5 × 6.4 × 2.9
Wooden door1.14 × 2.13 × 0.164.1 × 7.6 × 0.57
Street lamp1.70 × 5.01 × 0.636.1 × 17.9 × 2.3
Police car2.17 × 1.63 × 5.197.7 × 5.8 × 18.5
Shipping container6.10 × 2.59 × 2.4521.8 × 9.2 × 8.8
Oak tree12.54 × 10.45 × 11.3544.8 × 37.3 × 40.5

How Scale Unit works in the Importer

When you import a model, the Importer’s File Geometry section has a Scale Unit setting that tells Studio what unit the file was made in. The options are Stud, Meter, CM, MM, Foot and Inch, and the default is Studs.

  • Stud applies no conversion: one unit in the file becomes one stud.
  • Every other option converts through metres. Since 16 June 2026 the Importer uses 25:7 studs per metre, matching the 28 cm stud. Before that it counted 1 metre as 20 studs, so metric imports came in 5.6 times bigger than the 28 cm stud implies.
  • Custom scale factor, also in File Geometry, multiplies the result. It defaults to 1.0 and is saved with your import presets. Roblox’s announcement says a factor of 5.6 brings back the old size.

That wasn’t the first attempt: the Importer briefly used the 28 cm stud between 9 June and 12 August 2025, then rolled back after complaints. If some of your older imports don’t match each other, that window may be why.

A GLB is the easy case. The glTF specification says all distances are in metres, so the right choice is always Meter. Here’s what the other settings do to the 0.8 m wooden crate:

Scale Unit and factorCrate comes in atReal-world equivalent
Stud, 1.0 (the default)0.8 studs22 cm: far too small
Meter, 1.02.86 studs80 cm: real size
Meter, 1.253.57 studs1 m: a quarter larger, for an oversized world
Meter, 5.6 (the pre-June 2026 behaviour)16 studs4.48 m: a crate the size of a shed

Common mistakes

  • The model imports tiny. Scale Unit was left on the default, Studs, so every metre became one stud. Re-import with Meter.
  • The model imports huge. An old preset with a factor of 5.6, the Last Imported preset carrying settings from a different file, or a tutorial written before June 2026. Check the dimensions in File Geometry before you click Import.
  • The wrong unit for the file. FBX and OBJ files can be authored in centimetres or other units, so pick the unit they were made in. Roblox’s Blender guide pairs its own export settings with Stud; that advice is for that workflow. A GLB is always metres.
  • Fixing scale after import. The Scale tool works on a MeshPart, but every re-import starts from the import size again. Set the factor at import and save it as a preset so every prop in the game matches.
  • Props too thin for physics. Parts thinner than 0.05 studs (1.4 cm) render at their real size but collide as if they were 0.05 studs. A smartphone about 1 cm thick is around 0.04 studs.
  • A pivot in the wrong place. Set Pivot to Scene Origin is on by default, so the pivot lands at the file’s origin. A model built off-centre then rotates around a point outside itself.

Propsmith models and scale

Propsmith, an AI 3D prop generator, builds every model at real-world size in metres, standing on the ground at the origin, and every model page shows the size in metres next to the exact triangle count. The Roblox download is in metres too: set Scale Unit to Meter and the model comes in at its real size in studs, with the pivot near the bottom centre. If your game is oversized, set a custom scale factor once (1.25, say) and save it as a preset so every prop matches. The full import walkthrough is in how to import a GLB into Roblox Studio, and animated props are covered in importing an animated model.

The props from the table above. Free to download as GLB, STL or Roblox files with a Propsmith account.

Every library model is a mesh with no scripts, so it’s also a safe way to fill a map; see free Roblox models without backdoors. Browse more in furniture, building parts and street and city props.

Questions people ask

How many metres is a Roblox stud?

0.28 metres, or 28 cm, according to Roblox’s units page. One metre is about 3.57 studs.

How tall is a Roblox avatar in studs?

Roblox says classic-style avatars are around 5 studs tall (about 1.4 m) and avatars with more human proportions around 6 to 6.5 studs (about 1.7 to 1.8 m).

Which Scale Unit should I use for a GLB in Roblox Studio?

Meter. glTF always stores distances in metres, and since 16 June 2026 the Meter setting converts at 1 stud = 28 cm, so the model keeps its real size.

Why did my imports change size in June 2026?

Until 16 June 2026 the Importer counted 1 metre as 20 studs. It now uses 25:7, about 3.57 studs, so metric imports come in 5.6 times smaller than before. Set the custom scale factor to 5.6 if you need the old size.

How many studs is a foot?

About 1.09 studs. One stud is about 11 inches (0.92 feet).

Sources

Checked 1 November 2026.