PROPSMITH

Low poly vs high poly: how many triangles game props really need

Published

In short

Most game props need somewhere between a few hundred and about 15,000 triangles; vehicles, buildings and creatures can use 20,000 to 40,000. Roblox caps each mesh at 20,000 triangles, and Meta budgets a whole Quest 3 frame at about 1.3 to 1.8 million triangles and a few hundred draw calls, so the number of separate meshes in a prop matters as much as its triangle count.

What low poly and high poly mean

The terms are used in two ways. As an art style, low poly means visible facets and flat colours. As a budget, it means a model cheap enough to draw many times per frame. In a traditional pipeline, “high poly” is a sculpt with millions of polygons whose detail gets baked into normal maps on a low-poly game mesh, and only the low-poly mesh ships.

Engines count triangles, not polygons. A quad becomes two triangles on import, which is why Roblox tells character artists to “double the number of quads” to estimate a mesh’s count. Numbers below are triangles unless a source says otherwise. On this site, “low-poly” means 5,000 triangles or fewer.

Published triangle budgets

Checked November 2026. Platform owners publish limits for meshes, avatars and whole frames, not for props as such.

PlatformBudgetWhat it covers
Roblox20,000 trianglesAny single mesh (a hard import limit)
Roblox4,000 trianglesA rigid avatar accessory
Roblox10,742 trianglesA whole character body (the head alone: 4,000)
Meta Quest 3 and 3S1.3 to 1.8 million triangles; 200 to 1,000 draw callsEverything on screen in one frame
Meta Quest 2 and Pro750,000 to 1 million triangles; 80 to 600 draw callsEverything on screen in one frame
Unreal Engine 5 with NaniteNo fixed polycountNanite meshes on current desktop and console platforms
Unity (legacy 5.x manual)300 to 1,500 polygons on mobile; 1,500 to 4,000 on desktopOne character mesh, written for hardware of the early 2010s

Meta’s figures are “internally-recommended ranges” for standalone headsets, and a useful public guide to mobile-class hardware. The draw-call range runs from a busy simulation (fewer calls left for rendering) to a light one. Unity’s numbers come from a manual page of the Unity 5 era, so treat them as history rather than a target; Meta’s figures show how far mobile-class hardware has moved since. Godot publishes no number at all; its docs say that on a modern PC or console “vertex cost is low”, and that on mobile the thing to avoid is lots of geometry packed into a small part of the screen.

Do the arithmetic for a Quest 3. At 1.3 million triangles, you could show about 140 props of 9,300 triangles each in one frame. Draw calls run out much sooner, which is the next section.

Draw calls vs triangles

A draw call is one instruction from the engine to the GPU to render something, and each one has a fixed cost on the CPU. Roblox’s performance guide puts it plainly: the number of triangles “does influence how long a frame takes to render”, but it’s “not as important as the number of draw calls”.

Before batching, every separate mesh usually costs at least one draw call, and one per material on it. Engines claw some back: Unity batches meshes that share a material (static batching for objects that don’t move), Godot’s Forward+ renderer automatically instances identical meshes with the same material, and Roblox draws copies of the same mesh together. A prop made of many different small parts gets little help from any of them.

Compare triangles and meshes for a few props from the public prop library:

PropTrianglesSeparate meshes
Trash can13,58417
Wooden chair2,95220
Wooden crate4,052129
Rug9,944354
Bookshelf6,384372
Fire truck18,954456

The bookshelf has under half the trash can’s triangles but 22 times as many meshes, because every book is its own part. Dropped into a scene as it comes, it’s the more expensive of the two to draw. The median library prop has 54 separate meshes; on a Quest 3 running a busy scene (200 to 300 draw calls), four or five of those, unmerged, would use the whole budget.

How many triangles a prop actually needs

The useful question is how big the prop will be on screen. Godot’s docs advise against triangles smaller than a pixel, even on desktop GPUs: detail that small costs time and shows nothing. A prop the player picks up and inspects can carry detail; one that lines a street 30 metres away can’t show it.

The public prop library was built to budgets of about 5,000 triangles for handheld items, 15,000 for furniture and everyday props and 40,000 for vehicles, buildings and characters. The results:

Library categoryMedian trianglesExamples
Weapons and armour4,932Sword 4,660; pistol 3,648
Food and drink4,802Bread loaf 4,920
Furniture6,728Wooden chair 2,952; sofa 7,360; bed 11,848
Electronics and appliances9,052Television 2,211; desktop computer 9,106
Buildings and structures13,004Garage 1,512; castle 11,670
Vehicles15,996Sedan car 28,244
Characters and creatures26,816Dragon 38,600

Across the whole library the median is about 9,300 triangles, and about a third of models are under 5,000. Size isn’t what drives the count; curvature is. A 3 cm gold coin with ridged edges uses 3,468 triangles, more than the 91 cm wooden chair (2,952), because round shapes need many segments and flat planks need very few. In a game the coin is a few pixels wide, which is exactly when a lower-detail version earns its keep.

Every library model page shows the exact triangle count and real size in metres.

LODs: fewer triangles at a distance

A level of detail (LOD) is a simpler version of a mesh that the engine swaps in as the object gets further away. Every major engine can now make them for you:

  • Godot 4: generates LODs automatically when it imports a glTF, .blend or FBX scene, with no setup. (Not for OBJ, which imports as a bare mesh.)
  • Unity 6.2 and later: tick Generate mesh LODs in the model’s Import Settings. Older versions use an LOD Group with meshes you make yourself.
  • Unreal Engine: the editor can generate LODs for static meshes; with Nanite on desktop and console, LOD “no longer requires manual setup”.
  • Roblox: set MeshPart.RenderFidelity to Automatic or Performance, and with instance streaming on, a model’s LevelOfDetail to SLIM.

Most of these swap each mesh for a simpler copy of itself, so they cut triangles but not draw calls: a 100-part prop is still 100 meshes at its lowest LOD. Merge first, then generate LODs.

When high poly is the right call

Spend triangles on hero props the camera gets close to, on desktop and console projects using Nanite, and on renders and cinematics. If your pipeline is sculpt, bake and texture, the high-poly model is a source file, not a game asset. Propsmith isn’t a sculpting tool: it builds stylized props from simple shapes with flat-colour materials, which keeps counts modest by design.

A quick checklist

  1. Check the triangle count before you import. Every library model page shows it.
  2. Merge static parts; keep only moving parts separate.
  3. Generate LODs for anything that will often be small on screen.
  4. For Roblox, keep every mesh under 20,000 triangles (see Roblox mesh limits and how to import a GLB into Roblox Studio).
  5. Profile on the slowest device you support. In Roblox, Render Stats (Shift+F2) shows draw calls; Godot, Unity and Unreal have their own profilers.

Find props by budget in the public prop library, or see how to import a GLB into Godot and into Unity.

Questions people ask

How many polygons should a game asset have?

For a prop, a few hundred triangles for small pickups up to about 15,000 for furniture and everyday objects, and 20,000 to 40,000 for vehicles, buildings and creatures. Count triangles, not quads: a quad is two triangles once it reaches the engine.

Is 10,000 triangles a lot for a game prop?

Not on PC or console, and not for a prop the player walks up to. It’s close to the median in Propsmith’s public prop library (about 9,300). On mobile or standalone VR it’s fine for a few hero props, but give anything you place dozens of times a lower-detail version.

What is the triangle limit in Roblox?

20,000 triangles per mesh, as of November 2026. A model can contain several meshes, so a bigger prop has to be split into parts that each stay under the limit.

Do draw calls matter more than triangles?

Often, yes. Roblox’s performance guide says triangle count is “not as important as the number of draw calls”, and Meta’s Quest guidance allows hundreds of thousands of triangles but only a few hundred draw calls per frame. Merging a prop’s static parts usually saves more than cutting triangles.

What does low poly mean?

It means a model with few enough triangles to be cheap to draw, and also a faceted, flat-shaded art style. On this site, “low-poly” means 5,000 triangles or fewer; above that we say stylized.

Sources

Checked 1 November 2026.