What’s in a game prop’s STL
STL is the standard file for 3D printing, and the simplest: a list of triangles with no colour, no units and no parts. A game prop exported to STL brings three habits from game modelling that a slicer will notice:
- Real size. Game props are modelled at the size they are in the game, so a barrel is a metre tall. glTF, the format most game props travel in, measures in metres and uses Y as up; slicers expect millimetres and Z up. Propsmith, an AI 3D prop generator for games, converts its STL downloads to millimetres with Z up, so a prop opens at real size and standing. STLs from elsewhere may still be in metres or lying on their back (both covered below).
- Separate, overlapping parts. Propsmith builds each prop from simple shapes (boxes, cylinders, lathed and extruded profiles) that overlap where they join. A few parts, such as leaves or glass panes, can be thin single sheets.
None of this stops a print, but the STL is a starting point: STL for 3D printing, then check it in your slicer. The steps below cover PrusaSlicer 2.9, Bambu Studio 2.8 and Cura 5.13, checked against their documentation and source code in November 2026.
Step 1: Get an STL
Download it. Every model in the public prop library downloads as STL, free with a Propsmith account. If you’ve animated a model, the Save as menu also offers an STL of a pose: the start and end of a one-shot animation, or the current frame of a loop. That’s how you print a chest with its lid open.
Or convert the GLB in Blender. Converting yourself lets you pick the scale and fix geometry before the slicer sees it:
- File › Import › glTF 2.0 (.glb/.gltf). The importer turns glTF’s Y-up into Blender’s Z-up.
- Select the parts you want (press A for all).
- File › Export › STL. Tick Selection Only, set Scale to 1000 for real size in millimetres (or 100 for 1:10), and leave Forward and Up at Blender’s defaults (Y forward, Z up).
More on the import side in how to open and edit a GLB in Blender, and on the formats themselves in what is a GLB file.
Step 2: Choose a scale
A Propsmith STL opens at real size: the 1 m wooden barrel is 1,000 mm tall, far bigger than a print bed, while a coin or a key fits as it is. Most props open with no prompt. If a slicer does ask whether the model is in metres or inches, say No: the numbers are already millimetres.
Pick a ratio and type it as the scale: 10% for 1:10, 5% for 1:20. For the barrel:
| Ratio | Scale to type | Barrel height |
|---|---|---|
| 1:1 | 100% | 1,000 mm |
| 1:10 | 10% | 100 mm |
| 1:20 | 5% | 50 mm |
| 1:50 | 2% | 20 mm |
For tabletop scenery, use one ratio for every prop so a chest, a barrel and a campfire stay in proportion. Every model page lists the real size in metres, so you can work out the print size before you download.
If your STL is in metres
STLs exported from most game tools, and Propsmith STLs downloaded before 1 November 2026, are in metres, so a 1 m barrel reads as 1 mm. Each slicer tries to guess, and two of them can guess wrong:
| Slicer | What happens on import | What to do |
|---|---|---|
| PrusaSlicer 2.9 | Small props (a coin, a key, a candle) trigger “seem to be defined in meters”. Anything much bigger than about 10 cm triggers the inches version of the same question instead. | Say Yes to meters. Say No to inches (it would multiply by 25.4), then right-click the object › Convert from meters. |
| Bambu Studio 2.8 | One prompt for both: “Object too small… maybe in meters or inches”. Yes multiplies by 1,000 for small props (under about 8 litres, roughly a 20 cm cube) and by 25.4 for bigger ones. | For bigger props, say No, then right-click › Convert from meter, or type the scale yourself. |
| Cura 5.13 | With Scale extremely small models on (the default, under Preferences › General), anything more than 100 times smaller than the build volume in every direction is scaled up by a power of ten: “Auto scaled model to …% of original size”. | Read the percentage. On a typical 220 × 220 mm bed, a 1 m barrel becomes 100 mm (1:10) and a 3 cm coin 30 mm (1:1). |
From a metre-scale file, the scale to type is the ratio × 100,000%: 10,000% for 1:10, 5,000% for 1:20.
Step 3: Check it’s standing up
Propsmith STLs open standing on their base, front towards you. An STL from elsewhere may lie on its back: rotate it 90° around the X axis, or let the slicer drop a face onto the bed: Place on face in PrusaSlicer and Lay on face in Bambu Studio (both on the F key), or the rotate tool’s Lay flat and Select face to align to the build plate in Cura. Pick the face the prop really stands on: the base of a barrel, the feet of a chest.
Step 4: Read the mesh warnings
Expect a warning icon next to the object. What each problem means, and what to do:
- Overlapping parts. Not a problem in practice. PrusaSlicer and Bambu Studio’s default Regular slicing mode merges overlapping shells layer by layer, and Cura’s Union Overlapping Volumes (on by default) treats them as one solid.
- Open edges and non-manifold edges. These come from parts that aren’t closed shells. PrusaSlicer and Bambu Studio repair small errors automatically on load (“Auto-repaired N errors”). For more, right-click the warning icon: Fix by Windows repair algorithm in PrusaSlicer, Fix Model in Bambu Studio. Both are Windows-only. In Cura, try Extensive Stitching under Mesh Fixes, and Keep Disconnected Faces only as a last resort.
- Thin sheets and features. A single-sided sheet has no volume, so it simply won’t print, and very thin parts may vanish. At 1:20, anything thinner than 1 cm in the game model ends up under half a millimetre. Cura skips features below its Minimum Feature Size (0.1 mm by default); PrusaSlicer and Bambu Studio have a Detect thin walls option. Check the layer preview, not just the 3D view.
Step 5: Orientation and supports
Overhangs steeper than about 45 to 50 degrees from vertical need support (Cura’s default Support Overhang Angle is 50°). Each slicer offers a branching style that is easier to remove from rounded shapes: Organic in PrusaSlicer, tree(auto) in Bambu Studio, Tree in Cura. Use “build plate only” placement when supports resting on the model would scar it.
| Prop shape | Orientation | Supports |
|---|---|---|
| Barrels, crates, bins, closed chests | Upright on the base | Few or none; maybe under handles and lid lips |
| Chairs, tables, benches | Upside down, seat or top on the bed | Little; upright needs a full layer of support under the seat |
| Swords, shovels, keys | Flat on the widest face | Small amounts under guards and grips |
| Mushrooms, skulls, creatures | Upright | Organic or tree supports under caps, jaws and limbs |
| Tall props (lamp posts, trees) | Cut into pieces (PrusaSlicer and Bambu Studio have a cut tool) | Tree supports for branches and arms |
STL carries no colour, so plan to paint, or use your slicer’s painting tools if you have a multi-material printer.
Treasure chest11,852 triangles
Wooden barrel8,664 triangles
Mushroom11,136 triangles
Skull14,420 triangles
Crystal cluster1,772 triangles
Gold coin3,468 triangles
The licence lets you use models from the public library in your own projects, including commercial ones; read what you can do with models. For more props, browse treasure and collectibles or fantasy, and see how many triangles game props use.