These 40 props come from the public prop library of Propsmith, an AI 3D prop generator for games. Every one is free to view, and free to download with a Propsmith account, as a GLB, an STL or a Roblox file. They’re grouped by the places horror games usually happen, and each card shows the exact triangle count. Sizes are real-world metres, so they land in Studio at the right scale.
The props are built from simple shapes with flat colours, not photo textures, so they read as clean and slightly stylised. That suits Roblox horror, where darkness, fog and sound do more than surface detail. The lighting section further down covers the settings that do most of the work.
The abandoned hospital
A hospital level needs a few large pieces to fill the wards and small ones to scatter. The hospital bed is 2.13 m long, with fold-down side rails and a backrest on its own hinge. The operating table comes with its round surgical lamp on an arm, and the IV drip stand stands 2.07 m tall on a wheeled base. The syringe is 3,268 triangles, light enough to place by the dozen.
Hospital bed11,224 triangles
Operating table14,172 triangles
Iv drip stand9,198 triangles
Wheelchair14,724 triangles
Syringe3,268 triangles
First aid kit5,788 triangles
The school and the playground
An empty classroom needs very little: rows of the school desk (an old wooden desk with a slanted lid on a green steel frame), the chalkboard at the front, and a teddy bear left on a chair. Outside, the swing set has each swing on its own pivot. Its suggested animation is the swings swaying back and forth, which a signed-in user can build after grabbing a copy.
The haunted house
Start at the front door: dark green, four panels, 2.18 m tall, hinged in its frame. Fill the hall with a grandfather clock, an upright piano and a mannequin standing where no mannequin should be. The chandelier and candelabra carry candles, which are the natural places to put lights. The old CRT TV has a rabbit-ear antenna and a curved screen, and the clawfoot bathtub gives you a bathroom scene.
The graveyard and the woods
The dead tree is 5 m tall with twisted bare branches. The gravestone is already tilted, with moss at its base; rotate each copy a few degrees and a row of them stops looking pasted. The coffin has a hinged lid, the bear trap has its jaws on pivots, and the scarecrow belongs at the edge of a field or a forest path.
The basement and the power room
Plenty of Roblox horror games make the player restore power or dodge cameras. The generator, the electrical box (a grey utility cabinet with a hinged door) and the wall-mounted security camera cover that, and the wooden barricade blocks doorways the player shouldn’t reach yet. Three of the four are low-poly, under 5,000 triangles each.
Things the player picks up
Pickups are seen up close, and there are usually a lot of them, so all five here are low-poly: the flashlight (4,910 triangles), an iron skeleton key (4,814), a battery for the flashlight (3,744), a crowbar (1,104) and a hanging lantern (4,304).
Four monsters
The zombie, the horror monster (a tall, gaunt figure with glowing eyes) and the skeleton have separate limbs pivoted at the shoulders, elbows, hips and knees, so they can be animated; the ghost has its ragged hem on a pivot of its own. They’re also the heaviest props on this page: all four are over 19,000 triangles. Each has a suggested animation, such as the zombie’s slow shambling sway, but the downloads are static.
The horror hub has more, including a spider, a wolf, a cauldron and a stone altar.
Lighting and atmosphere in Roblox
In Studio, a horror mood comes mostly from the Lighting service and an Atmosphere object inside it. The values below are starting points to tune by eye; what each property does comes from Roblox’s documentation.
Make it night and dark
- ClockTime is the time of day in hours, 0 to 24. Set it to 0 for midnight. It won’t change during play unless a script changes it.
- OutdoorAmbient is the hue of outdoor areas, 127, 127, 127 by default. Try about 30, 30, 40 for a cold, dark outside.
- Ambient is the hue of areas hidden from the sky, such as indoors. It’s black by default: leave it for pitch-dark rooms, or lift it slightly so players can find the walls.
- ExposureCompensation runs from −5 to 5, and −1 halves the exposure. Somewhere between −0.5 and −1 darkens the whole scene without touching every light.
- LightingStyle: Realistic gives Roblox’s most advanced lights and shadows, Soft a flatter, retro look. If shadows matter to your game, Roblox recommends setting PrioritizeLightingQuality to true. The older Technology property is deprecated in favour of these two.
Fog with Atmosphere
- Density is how many particles are in the air: the higher it is, the more of the world it hides. Raise it until the far end of a path through the dead trees disappears.
- Haze spreads the effect above the horizon and into the distance. Roblox suggests pairing it with Color for moods such as “a foggy blue tint for a somber game”.
- Offset has to be balanced against Density. Too low and the sky shows through distant objects; too high and far terrain stands out with more detail than you want.
Once an Atmosphere object is inside Lighting, the older FogStart, FogEnd and FogColor properties are hidden. Use one system, not both.
Lights inside the props
The Roblox file merges every part of a prop into one mesh, so there’s no separate flame part to hold a light. Add an Attachment where the flame sits and put a PointLight in it; Roblox lets a PointLight live in an Attachment or a part. Range is in studs and is capped at 120, and a higher Brightness doesn’t make a light reach past its Range. Warm, short-range lights on the candelabra or the lantern light a room in pools, and with Shadows on, the planks of the wooden barricade throw stripes across the floor. For the flashlight, use a SpotLight; its Angle goes up to 180 degrees.
Importing into Roblox Studio
- Open a model page and download the Roblox file. It’s free with a Propsmith account.
- In Studio, choose File › Import to open the Importer, and pick the file.
- Set Scale Unit to Meter. Studio defaults to studs, and these models are in metres. At 1 stud = 28 cm, the 2.1 m grandfather clock comes in about 7.5 studs tall.
- Import, then anchor the model and set its collisions.
Roblox allows up to 20,000 triangles in a single mesh. The Roblox file merges each prop into one mesh and splits anything larger into chunks under 19,000 triangles, so 36 of these 40 import as a single MeshPart and the four monsters as two each. Colours come packed into a tiny palette texture. The full walkthrough is in How to import a GLB into Roblox Studio, the limits are explained in Roblox mesh limits, and animated models are covered in importing an animated model. Since the files are meshes with no scripts, there is nothing in them to hide a backdoor; see free Roblox models without backdoors.
What these props can’t do
They have no image textures: no grime maps, blood splatter or rust photos. Add those in Studio with decals, or keep the clean look and let the lighting carry it. The monsters are stylised, not realistic. If you need a prop that isn’t here, describe it in a sentence (“a rusty hospital gurney with one bent wheel”) and Propsmith builds it in about a minute. A public model costs 5 credits, and the Free plan includes 20 credits a month.